| Part Number | Description | Cable Details | Link to Datasheet | Buy from FTDI |
| TTL UART cables supporting range of voltage I/O levels with wire-ended output | TTL-232RG-VSW3V3-WE | Supports +3.3V based TTL level UART signals and +3.3V / 50mA power output. | | Wire ended 6 core, 5mm UL2464 24 AWG output |
|
| Datasheet |
| TTL-232RG-VSW5V-WE | Supports +5V based TTL level UART signals and +5V / 450mA power output | Datasheet |
| TTL-232RG-VREG3V3-WE | Supports +3.3V based TTL level UART signals and +3.3V / 250mA rated power output. | Datasheet |
| TTL-232RG-VREG1V8-WE | Supports +1.8V TTL level UART signals and +1.8V / 100mA rated power output. | Datasheet |
| TTL-232RG-VIP-WE | Cable features voltage reference input for setting UART signalling levels. | Datasheet |
| TTL-232R-3V3-WE | Version 1 cable. Supports +3.3V UART signalling and +5V/75mA power output. | Datasheet |
| TTL-232R-5V-WE | Version 1 cable. Supports +5V based UART signalling and +5V/75mA based power output. | Datasheet |
| Connector based cables | TTL-232R-3V3 | USB cable with 6 way 0.1' pitch single inline connector with +3.3V signalling. | | 6 way, 0.1' pitch single inline connector |
| Datasheet |
| TTL-232R-5V | USB cable with 6 way 0.1' pitch single inline connector with +5.0V signalling. | Datasheet |
| TTL-232R-3V3-2mm | USB cable with +3.3V based UART output on 2mm connector.
Designed for use with FTDI VDRIVE2 and VMUSIC2 modules. | | 8-pin, keyed 2mm pitch connector |
| Datasheet |
| TTL-232R-3V3-AJ | Cable with audio jack connector with +3.3V based TX, and RX signalling. | | 3.5mm audio jack output. Connector configuration: tip - TX, ring - RX, sleeve - GND |
| Datasheet |
| TTL-232R-5V-AJ | Cable with audio jack connector with +5V based TX and RX signalling. | Datasheet |
| PCB assemblies | TTL-232R-3V3-PCB | PCB only. Supports +3.3V UART signalling and +5V/75mA power output. | | No cable – USB connector with PCB only |
| Datasheet |
| TTL-232R-5V-PCB | PCB only. Supports +5V UART signalling and +5V/75mA power output. | Datasheet |
USB TO RS232 CONVERTER
Cts Electronics Ls 100 Usb Driver Adapter
CTS/Arca: Scanning Speed: 150 Documents per Minute: USB Support: Yes: Weight: 3.5 kg: Ethernet: Ethernet connectivity 10/100Base-T and WIFI by LsConnect device: Model: ARCA LS150 Check Scanner: Dimensions: 9' L x 5.5' W x 6.9' H: Resolution: 100,200 or 300 dpi,selectable: Gray Scale Levels: 16 or 256: Image Formats.
Cts Electronics Ls 100 Usb Driver Updater
- USB 232 M is a product that connects to a PC’s USB port providing a high-speed Asynchronous, for the RS 232 serial port to communicate with RS 232 devices.
- The USB 232 M is provided with TxD/RxD LEDs to indicate communication status and supports a maximum speed of 500Kbps. RS 232 serial port is furnished with a 9 pin D-type male connector, which is similar to that found behind a PC. When the device is connected to PC’s USB port, the USB 232 M is automatically detected and is installed as a native COM port, and is compatible with existing serial communication applications. Users can add/remove this device once plugged into the USB port of the PC, since this appears as a COM port
- The Serial interface consists of two data signals – TxD (Transmit) and RxD (Receive) as well as six control signals – RTS, CTS, DSR, DTR, DCD and RI. The serial interface supports RTS/CTS, DSR/DTR and X-on/X-off handshaking
- The product is programmable to support a variety of data formats and baud rates
- Attaches to 96Boards low-speed (LS) expansion connector: FT230X USB to UART adapter chip USB bus powered. Doesn’t disconnect when base board power is cycled Switchable between LS UART0 and UART1. (UART1 is the default console) CTS/RTS with using UART0 TX and RX LEDs Remote control of baseboard reset and power signals Base board reset button.
- CTS LS100’s compact design makes it ideal for efficient teller fitting any space from a small desk or bank teller station to a small business or merchant environment.With a variety of configurations, the reliable built, the minimal operational noise and the high quality in processing features, LS100 proves to be the best option for professional check capture applications.
Features & Specifications
| Serial Interface |
| Interface | RS 232, RS 485, RS 422 |
| USB | USB V 1.1 & 2.0 Compatible |
| Connectors |
| Serial | DB 9 pin Male as DTE |
| USB | Type A 4 pin Plug |
| Serial |
| Baud Rate | Upto 500 Kbps |
| Data Bits | 7 or 8 |
| Parity | None, Even, Odd, Mark, Space |
| Stop Bits | 1 or 2 |
| Flow Controls | Hardware (RTS/CTS) / Software (X-on / X-off) Handshaking supported |
| Supported OS | Windows XP, XP – 64 bit, XP – Embedded, Vista, Visa – 64 bit, CE 4.2 / 5.0 / 6.0, Windows 7, |
| Windows 2000, Server 2003, Server 2008, MAC OS 8 / 9, OS – X, Linux 2.4 and greater. |
| Software Driver | Plug and Play for most operating systems |
| Support | Full Standard RS 232 serial interface signals |
| Indicators (LED) |
| Transmit Data (TxD) | Red |
| Receive Data (RxD) | Green |
| Power |
| Input | USB port powered |
| Packaging |
| Dimensions (L x W x H) | 72mm(L) x 43mm(W) x 21mm(H) |
| Weight | 70g |
| Warranty |
| Warranty Period | 12 Months |
Applications
- Provides RS 232 Serial Interface to any PC having only USB port
Ordering Informaiton
| Model Number | Description |
| USB 232 – M | USB to RS 232 Converter |